Just Upgraded exhaust, engine idles and dies? (8 replies)
Hey guys, just threw a proma circuit on my 77 maxi sport. upjetted from 66 (which i think was running rich) to a 73. started up no problems, idled fine for about 2 mins and then died. took a while to...
View ArticleFA50 Clutch Spring Install: First Timer... HELP (no replies)
So yeah, i bought the Malossi Clutch Spring Kit to get those red springs for the my FA. This is my first time working on the trans and clutch so if any of you guys have some words of wisdom, please...
View ArticleFastest 50cc moped (6 replies)
A few years ago I was driving past the Bonneville Salt Flats and that reminded me that back in the '70s I had wanted to see how fast I could make a moped go. I spent the next year modifying a Puch...
View ArticleDo I need a 15mm Bing on Puch bild (6 replies)
I have a ZA50 powered Puch that I am about begin to kit to 70CC. I have a Bing 14mm on it now and am wondering id I can use that, with appropriate jetting, or should I liik for a 15mm Bing? Thanks, Tom
View ArticleBatavus Starflite Chain "play" and Carb Jetting (1 reply)
Hoping someone here might be able to help me find some info on adjusting the jetting on my 18mm Mikuni carb. Im trying to get some more power off the get go and was told with new reeds i could adjust...
View ArticlePeugeot 103 pipe recommendations (2 replies)
Have a pug 103 with these a15.15 SHA carb and an MBK CDI Will probably also get a 70cc gilardoni kit. I'm wondering what pipe I should get if I'm using my moped for a daily commuter and more...
View ArticleMinarelli fan on Garelli flywheel? (1 reply)
I am trying to get a fan on my motor for better cooling and wanted to know if others have tried this. I saw there were 103, 108 and all kinds of fan shapes out there, not sure if these are hole...
View ArticleClik here to view.
Hobbit not fully variating (2 replies)
PA50-2, Proma, dual stagers, clutch springs, stock cdi, stock belt. Used to do 37 or so from memory. Put it away for a year or two and got it back out this year. After getting blasted at a few...
View ArticleMPG on your kitted moped? (4 replies)
My son's moped only gets approximately 15 -20 miles per gallon.. Is that about right?.. He has an 09 Tomos streetmate r with a 70cc kit.. And an 18mm Mikuni carb and an mlm pipe..29 front sprocket and...
View ArticleDoppler ER3 with clucth function/no bite on Artek crank (3 replies)
So this is on a new av10 engine i just built. This is my first motor build and i have been using tomohawk's gr1 doppler spec videos on youtube as a reference. Big thanks to tomohawk for taking the...
View ArticleCiao Variator (4 replies)
Hi Guys. Can I install on my Ciao variator (default is without)? Thanks.
View ArticlePuch ktm clutch. (1 reply)
Alittle late to the game but can someone explain to me the mods you have to do to run one and is it worth it?
View Article1979 Motron Medalist upgrades (please help!) (no replies)
So I bought a 1979 Motron Medalist, and I want to upgrade the stock Minarelli v1 motor, as well as a few other parts. It's really hard to find parts for this thing, and I've been looking everywhere....
View ArticleUnpacked baffle thoughts? Puch E50 (1 reply)
Lookin for a few extra M-p-hes Anyone ride with an unpacked exhausted baffle? I know this will effect my bottom-end but I was watching some vintage moped racing and it looked like they were ripping...
View ArticleY'all Mother Fuckers Wanna Learn How to Bump Start a Tomo!? (3 replies)
Become official and I'll tell you Ps it involves booze and going above 20mph
View ArticleSpigot mount carb radiator hose intake. (3 replies)
[attachment 155287 61TecggimRL._SL1500_.jpg]Has anyone used 3m scotchcast casting tape to make a radiator hose intake bend the direction they want it to? Does it hold up to the radiant heat? Is there...
View Article78 hobbit 6v voltage regulator from treats (6 replies)
I picked up one of the 6v regulators from treats, I don't know where to put it! Anyone used one of these or a similar type?
View ArticleFun DR porting. (2 replies)
[attachment 155349 image.jpeg][attachment 155350 image.jpeg][attachment 155351 image.jpeg]Wanted to go crazy wide after the semi bridge. Runs great. A semi bridge is kinda cool if you think of it like...
View ArticleA Question About Clutch Tuning On E50's (1 reply)
Hey guys, I've been reading a bit about tuning an e50 clutch, and I more or less understand the "how" part (how to tune it to grab at a lower or higher rpm) but have a question about the "why" part....
View Article19 polini cp on treats reed jetting (2 replies)
Trying to tune an E50 someone else threw together and haven't found any tuning info on this setup. Does anyone know a decent starting point for jetting at about sea level for this?
View Article