Anyone have any experience with their LX swingarm? This is a second hand moped and I can only imagine if it was dropped or abused.
When I'm riding about 35 mph, I can feel some waviness in the rear. I've also felt that when turning slow on a steep incline (back wheel felt like it slipped). The bearings seem tight as is the chain. The rear wheel is also tight.
I looked at the swing arm axle and the left nut is turned down about 3/4" while the right side is turned down about half that. I tightened both nuts down further with two wrenches as the axle was turning. I didn't lock down the swingarm. Is there a torque rating or something for these nuts? Maybe I have some play when the bike is in motion. Any thoughts???
When I'm riding about 35 mph, I can feel some waviness in the rear. I've also felt that when turning slow on a steep incline (back wheel felt like it slipped). The bearings seem tight as is the chain. The rear wheel is also tight.
I looked at the swing arm axle and the left nut is turned down about 3/4" while the right side is turned down about half that. I tightened both nuts down further with two wrenches as the axle was turning. I didn't lock down the swingarm. Is there a torque rating or something for these nuts? Maybe I have some play when the bike is in motion. Any thoughts???